| HYDRAULIC
SQUARE-EXPANDER MACHINE |
Description
of products |
YH-18A1 |
Advantages |
This
machine adopts moveable angle-tendon pressing mechanism
and has auto-unloading device for container body |
| Purposes |
Expand
the welded container cylinder into square, at the same
time coining four R-angle strengthened tendons |
| Main
Technical Parameters
| Range
of production：9-20L big square containers |
Working air
pressure：0.3Mpa |
| Thickness
of tinplate：0.26-0.35mm |
Volume of
lil tand ：125L |
| Output：15-20cans/min |
Dimension：1300*700*1100mm |
| Power
of electric motor：5HP |
Net weight：600kg |
| Applied
power source：AC 380V 50HZ |
|
|
| HYDRAULIC
FOUR-SIDE PANELLING MACHINE |
Description
of products |
YH-18A2 |
Advantages |
This
maching conducts four-side panelling and pressing at
the same time and is equipped with auto-unloading device
for container body. |
| Purposes |
Coin
strengthened tendors or other special-required patterns
on the body of container when it isswollen to square. |
Main Technical Parameters
| Range
of production：9-20L big square containers |
Working
air pressure：0.3Mpa |
| Thickness
of tinplate：0.26-0.35mm |
Volume of
oil tank：125L |
| Output：15-20cans/min |
Dimension：1300*700*1100mm |
| Power：7.5HP |
Net weight：600kg |
| Maximum
oil pressure：10Mpa |
Applied
power source：AC 380V 50HZ |
|
| HYDRAULIC
FLANGING MACHINE |
Description
of products |
YH-18A3 |
Advantages |
This
machine adopts the design of replenished block and has
the advantages of smoothness and uniformity,which can
ensure the quality of sealing |
| Purposes |
Conduct
flanging operation on the can body after conainer body
is coined and pressed. |
Main
Technical Parameters
| Range
of production：9-20L big square containers |
Maximum
oil pressure：8Mpa |
| Thickness
of tinplate：0.26-0.35mm |
Volume of
oil tank：125L |
| Output：15-20cans/min |
Dimension：1300*700*1100mm |
| Power：5HP |
Net weight：500kg |
| Applied
power source：AC 380V 50HZ |
|
|
| PNEUMATIC
PRECISE DOUBLE-PAINT SPOT-WELDING MACHINE |
Description
of products |
YDH-35 |
Purposes |
it
is applied to dual-paint-surface handle welding of 3-18L
square containers,or small and big round containers. |
| Main
Technical Parameters
| Transformer
power：35KVA |
Welding
voltage：3-7V |
| Input voltage：AC
380V single-phase |
Air pressure：0.4Mpa |
| output：25cans/min |
Air consumption：250L/min |
| Thickness
of tinplate：0.18-0.5mm |
Net weight：280kg |
| Electrode
enclosed height：100mm |
Dimension：800*550*1350mm |
|
| PNEUMATIC
PRECISE DOUBLE-PAINT SPOT-WELDING MACHINE |
Description
of products |
YDH-35 |
Purposes |
it
is applied to dual-paint-surface handle welding of 3-18L
square containers,or small and big round containers. |
| Main
Technical Parameters
| Transformer
power：35KVA |
Welding
voltage：3-7V |
| Input voltage：AC
380V single-phase |
Air pressure：0.4Mpa |
| output：25cans/min |
Air consumption：250L/min |
| Thickness
of tinplate：0.18-0.5mm |
Net weight：280kg |
| Electrode
enclosed height：100mm |
Dimension：800*550*1350mm |
|
|
IMTATING
LINING
MACHINE ZJ-1 |
Description
of products |
ZJ-1 |
Purposes |
lt
is suitable for drip of sealing glue to irregular container
cover |
| Main
Technical Parameters
| Producton
range： |
18L
big square container |
Working
air presure：0.8-1.5Mpa |
| 3-4L
big square container |
Dimension：1000*800*2000mm |
| Output：20cans/min |
Total weight：300kg |
| Power：0.75KW |
Applied
power source：AC 380V 50HZ |
|
